CDG Certification Limited
CDG Certification Limited
Connaught Place, New Delhi, Delhi
GST No. 07AAFCC0653H1ZW
TrustSEAL Verified
Call 08048620460 35% Response Rate
SEND EMAIL

Inspection Services

Service Provider of a wide range of services which include fire safety certification services, pre shipment inspection service, factory inspection services, fire safety audit services, electrical safety audit services and vendor inspection services.

Fire Safety Certification Services

Fire Safety Certification Services
  • Fire Safety Certification Services
Get Best Quote
Approx. Price: Rs 10 / DayGet Latest Price
Another name of the Fire Safety Certificate is the Certificate of Conformity to the Requirements of Fire Safety. The function of the given certificate is to prove conformity of the production to the approved rules of safety

Fire inspection is conducted by the fire departments to assess the potential fire safety hazards in a building. Its type and frequency varies from one to another, depending on the location of the building or installation, relevant laws, local and special regulations applicable for the type of building occupancy. The building under inspection should meet a set of standard codes related to fire safety:

  • fire detection and alarm systems,
  • types and operational state of fire extinguishers,
  • fire hydrants and pumps,
  • means of egress and emergency signage etc.

What Is on A Fire Safety Inspection Report That You Should Be Aware Of?

When it comes to CDG, property owners must be aware of all rules and regulations. Staying in compliance will help you to pass a safety inspection report. A fire inspector will visit your property to complete an inspection and you want to be prepared. Fire protection features must be maintained in order to pass your inspection.

Fire Protection and Alarm Systems

In your facility, any fire protection systems, as well as alarms, must be in working order. The inspection sheet will include such items and they will be checked. If you own a building that has sprinklers, they must be in proper working order. Fire alarms must also be working correctly. Alarms and smoke detectors will be checked and reviewed by the inspector. Review all of these areas on a regular basis to ensure they are working and will pass inspection.

Certified Fire Extinguishers

Every property must have a fire extinguisher on-site to protect individuals in the event of a fire. The type of building you operate will determine the number and type of fire extinguisher you are required to have on-site. Fire extinguishers must be certified and operational. The inspector will be checking to make sure that all fire extinguishers are working and are certified. When you do not have the proper fire extinguishers, you can fail your inspection.

Emergency Lighting and Exits

In your building, the Chicago fire safety inspection will also include a review of the emergency lighting and exit areas. All emergency lighting needs to be functioning properly. This includes all light bulbs are operational and that exits are clear and easily defined.

Depending on the type of building you have, the exits may include lighted EXIT signs or flashing lights during an emergency. Every exit needs to be clearly marked and have the appropriate signage and lighting so that individuals inside know where to go and how to exit in the event of a fire.

Clear Sightlines

The fire inspector will also be reviewing the outside of your building and checking for sightlines. The fire department needs to be able to recognize your building. The address needs to be clearly marked so that your property can be found if a fire occurs and 911 is called.

Any fire hydrants need to be clear of debris on the property. Any bushes or other landscaping must remain clear of the fire hydrant so that the fire department can easily access water when a fire occurs nearby.

Request
Callback
Yes! I am Interested

Pre Shipment Inspection Service

Pre Shipment Inspection Service
  • Pre Shipment Inspection Service
Get Best Quote
Approx. Price: Rs 10 / DayGet Latest Price

Service Details:

Minimum Order Quantity1 Day
Mode Of ReportSoft Copy

pre-shipment inspection is a step taken by trade operators (buyers, suppliers, agencies) to inspect newly manufactured products before they are shipped for export/import. The purposes of a pre-shipment inspection are to: Check the quantity and quality of the merchandise. 
In recent years, the rising demand for consumer products in developed countries has forced importers to seek suppliers in developing countries. As more developing countries enter the global supply chain, importers have to adopt effective quality control measures to avoid low-quality products from insidious suppliers and manufacturers. Quality control is crucial for you to avoid losses and reputational damage due to defective products. Exporters and manufacturers also need quality control to comply with regulations set by government agencies and avoid legal issues. The most important step in the quality control process is pre-shipment inspection (PSI).
Pre-shipment inspection ensures that production complies with specifications of the buyer and/or the terms of a purchase order or letter of credit. This inspection is conducted on finished products when at least 80% of the order has been packed for shipping. This inspection is done according to standard Acceptable Quality Limits (AQL) specs for the product, or based upon customer requirements. Samples are selected and inspected for defects at random, according to these standards and procedures.
Request
Callback
Yes! I am Interested

Factory Inspection Services

Factory Inspection Services
  • Factory Inspection Services
Get Best Quote
Approx. Price: Rs 10 / DayGet Latest Price
Our factory inspection services covers all mandatory areas to determine wether a factory comply with applicable legislative / statutory requirments, international factory / labour standards & industry best practices. We focus on following areas :

Legislative compliances
Required permits & liscences
Indian factory act
Indian labour laws
ILO conventions
CSR polcy & practices
Environmental compliances
Occupational health & safety
Production capacity
Past track record of business

We can design a customised factory inspection as per your requirements.
Request
Callback
Yes! I am Interested

Fire Safety Audit Services

Fire Safety Audit Services
  • Fire Safety Audit Services
Get Best Quote
Approx. Price: Rs 10 / DayGet Latest Price
CDG is a leading fire safety inspection company of India. Any workplace fire safety inspection that is carried out should be done by a qualified inspector. Our fire safety inspectors evaluate several areas:

  1. They determine ways that fires could start within the building. Our
  2. inspectors check the safety systems in place, such as smoke alarms, fire extinguishers, and sprinkler systems. They make sure these systems are regularly maintained and kept in good working order. They often request to see documentation on the maintenance of these systems. 
    1. They check the systems that assist with egress, such as lighted exit signs and exit doors. Inspectors will make sure these features function effectively and assist with egress, rather than impeding it.
    2. Inspectors ensure that emergency personnel have easy, immediate access to the building.
  3. Businesses should take these steps to prepare for a fire safety inspection by checking on their compliance within each of these areas.

    Fire safety audit is an effective tool for assessing fire safety standards of an organization or occupancy. A comprehensive fire safety audit should address the inherent fire hazardous associated with the day to day activities in an occupancy and recommend measures to reduce the potential fire hazards.

    We conduct fire safety inspection for all type of buildings viz : commercial establishments, residential buildings, factory / manufacturing units etc.

Request
Callback
Yes! I am Interested

Electrical Safety Audit Services

Electrical Safety Audit Services
  • Electrical Safety Audit Services
Get Best Quote
Approx. Price: Rs 10 / DayGet Latest Price
Electrical Safety Audit is examining the safety of electrical installations of any industrial unit or organization. Electrical Safety Audit is performed by enquiry, inspection, testing and verification. Electrical Safety Audit & Independent Assessments by competent Consultivo Electrical Safety Auditors identify the inadequate preparedness in electrical safety aspects. Electrical reasons are also the main cause in the context of the outbreak of fire. Many organisations across industries lack in implementing proper safety systems & features in this area. Electrical Safety Audit is examining the security of electrical installations of any industrial unit or organization. Electrical Safety Audit is performed by enquiry, inspection, testing and verification. Electrical Safety Audits are conducted by experienced professionals who assist clients in reducing risk and help to ensure compliance with applicable Safety Standards and Regulations. 

Electrical Safety Audit has become crucial to the proper maintenance of the facility. In addition, rising fuel costs coupled with increased global competition is forcing industries/buildings and other facilities to slash energy costs. Electrical Safety Audit is conducted to investigate if complaints and concerns by workers regarding electrical safety is substantiated and if there are other electrical safety or general safety hazards at the facility that should be addressed. The audit focus on current electrical safety conditions, and selected other safety measures for the facility. A professional electrical safety audit will provide you with the information you need to protect your business.
Request
Callback
Yes! I am Interested

Vendor Inspection Services

Vendor Inspection Services
  • Vendor Inspection Services
Get Best Quote
Approx. Price: Rs 10 / DayGet Latest Price
Complex supply chains need to be managed in a way that minimizes risk, reduces cost and delay, improves safety and quality, and ensures compliance with local and international standards. All these considerations make quality vendor inspection services essential. We provide a complete solution, covering every aspect of supply chain management. Our global network of competent, qualified experts is strategically located to serve the world’s major industrial suppliers, and supported by more than 85 operational offices worldwide. From one-day visits to long-term residencies, our technical specialists are on hand to carry out inspection and verification services whenever and wherever you need them. Our key areas of expertise include the inspection of material, machinery and manufactured items, for example vessels, rotating equipment, valves, fittings, piping and other components. This is complemented by process specific expertise in disciplines such as manufacturing, welding and fabrication, instrumentation and control systems, coatings and non-destructive testing.

Our inspectors will detect problems earlier in the supply process, saving you re-work and replacement costs as well as ensuring that your product or plant is delivered on time.  


Vendor inspections are surveillance activities carried out at supplier's premises. This service is particularly relevant in the Oil & Gas, Petrochemical, Power Generation, Pipelines, Marine, Mining, Infrastructure, Transportation & Renewables industries where clients procurement departments may procure a considerable amount of items, with many different manufacturers around the world.

Main benefits:

  • assure the development and continued operation of a project, which depends on the right quality of equipment, products and components delivered by vendors
  • verify the conformity with the requirements of applicable international or national codes, standards and technical specifications stated in the contract between client and manufacturer, before the products are dispatched.
  • detect eventual defects at source
  • determinate in advance the compliance with client expectations, in order to minimize or avoid safety issues and the risk of extra costs, due to subsequent failures at site.

    Vendor inspection services provide confidence to clients that purchased equipment will arrive to the correct specification, and minimises the financial impact of faulty equipment. The level of vendor inspection services provided is set by the client and is intrinsically linked to the equipment involved, the Purchase Order requirements and the technical specifications / standards applicable to the equipment. Normally the level of inspection is reviewed with the client to ensure that both parties fully understand what is expected of the other.
Request
Callback
Yes! I am Interested

Factory Audit Service

Factory Audit Service
  • Factory Audit Service
Get Best Quote
Approx. Price: Rs 10 / DayGet Latest Price

Service Details:

Minimum Order Quantity1 Day
Type Of Service Provider PreferredCompany

A Factory Audit or Supplier Audit (at CDG we call these Quality System and Compliance Audits) is a systematic evaluation of the quality system and compliance level of a supplier.

The purpose of a quality control audit is to help our clients verify the capability and suitability of their suppliers. This factory assessment is typically carried out by an internal or external quality auditor or factory auditor. Typically, these services would start out with a standard supplier evaluation or factory assessment and trigger a process of continuous improvement. Explore our range of quality control audit offerings and capabilities by clicking below on the relevant area of quality compliance challenge required. A supplier audit is when an organisation audits a supplier to ensure that they are meeting requirements specified in a contract. These audits can be conducted on-site by reviewing processes or off-site by reviewing documentation submitted by the supplier, ensuring quality across your supply chain.

Request
Callback
Yes! I am Interested

Fire Safety Inspection Services

Fire Safety Inspection Services
  • Fire Safety Inspection Services
Get Best Quote
Approx. Price: Rs 10 / DayGet Latest Price
Fire safety inspection is conducted to assess the potential fire safety hazards in a building. Its type and frequency varies from one to another, depending on the location of the building or installation, relevant laws, local and special regulations applicable for the type of building occupancy.


A fire safety inspector will check out the workplace, the activities undertaken there and your management of fire safety. They’ll also audit your fire risk assessment to ensure that you’re complying with fire safety law.

Fire safety inspections are important to conduct for a residential space or a business. Fire safety inspections can help to ensure that equipment is operating properly and can help prevent any potential dangerous issues from occurring. There are many benefits that can arise from fire safety inspections. A primary advantage of fire safety inspections is that inspections can help to prevent fires from happening.

For example, fire safety inspections can involve checking for fire hazards within a building. Check out some more of the most common reasons to schedule fire safety inspections for a residence or commercial facility.

 

  1. Inspections involve checking smoke alarms to make sure they are working without an issue. Smoke alarms play a key role in preventing fires from spreading, and the alarms can warn building occupants about a fire that could be starting.
  2. A fire escape plan can be checked during a fire safety inspection to make sure it is a proper plan and to ensure it is updated.
  3. Fire pumps can be tested during a fire safety inspection process. The fire pump provides water for a fire protection system. It is a key part for system components such as fire sprinklers.
  4. Fire extinguishers can be checked when a fire safety inspection occurs. Fire extinguishers are important to keep you safe. If a fire does occur, fire extinguishers can avoid letting fires spread out and can try to eliminate the fire completely. Checking a fire extinguisher, which is a part of the fire safety system that typically lasts for a long time, is an important part of the fire safety inspection process.
  5. Exit signs and exit doors are also important parts of a fire safety system. They can be checked to make sure exits are safe and the right ways to go in case of a fire.
  6. A fire safety inspection can ensure that all equipment, such as smoke alarms and fire extinguishers, are located in the right places in the house or building.
  7. If there is an issue with any equipment, such as a fire alarm system, it can be fixed during the inspection process. It is important to make sure equipment works so that it can help in the case of a fire.
  8. Fire sprinklers are also essential parts of a fire protection system. They can be checked in an inspection. Fire sprinklers consist of water in pipes, and the sprinkler can spray water to control and eliminate flames that result from a potential fire. Fire sprinklers should be working properly, and they are key to a proper fire protection system. They can be very effective and beneficial in the case of a fire, and an inspection can ensure that they are working.
  9. A fire inspection can also involve checking equipment such as emergency lights. Emergency lights can help to make the environment safer and can ensure that the residential area or facility is prepared in case of a fire.
Request
Callback
Yes! I am Interested

Product Inspection Services in India

Product Inspection Services in India
  • Product Inspection Services in India
Get Best Quote
Approx. Price: Rs 10 / DayGet Latest Price
CDG offers product inspection and auditing services throughout much of Asia, including India. With a team of experienced and managed QC staff, we’re available to check your product on your behalf with early production, during production or final pre-shipment inspection. Our inspectors have experience with many product types and industries and can verify your product based on your specific standards. Rarely, if ever, is an order of goods mass-produced flawlessly. You’ll almost always find quality defects and other issues in some quantity. India inspection page 300.jpgBut it’s difficult to know just how many defects are present in a particular order without inspection. If an order of goods from your Indian supplier ships with a high number of defective units, it can be very expensive to rework the product after you’ve received it. Defective goods that you’re unable to rework could cost you even more and leave your customers dissatisfied.

Product inspection in India helps you catch these and other issues before the goods leave the factory. Only by finding any problems before shipping can you address them with your supplier so they aren’t found in the finished goods you receive. This is especially important in factories operating in developing countries, like India, that are less likely to have sophisticated quality control measures in place.

Factories typically have their own quality control team. But the problem with solely relying on internal inspections is that they can be biased. The inspection results could give you an inaccurate representation of the condition of your goods when the staff inspecting are employed by the factory itself. But finding a third-party inspection firm with staff in India can be a challenge.

CDG OFFERS YOU PRODUCT INSPECTION IN INDIA

Hiring CDG to serve as your third-party QC partner helps you focus more on your customers and worry less about your product quality. When our team of experts conducts a product inspection in India on your behalf, you can trust that the results of our professional report are detailed and accurate. Our team will:

  • Discuss your requirements in detail with you and develop inspection criteria that address your product concerns
  • Perform any relevant on-site testing for your product at the factory
  • Compare any approved product samples with mass-production and report on any nonconformities
  • Measure and report any product dimensions based on your tolerances
  • Issue a thorough inspection report typically within 24 hours, complete with photos of our findings

We know successfully sourcing from India can be a difficult task. And our team can safeguard your business from manufacturing and quality issues. With product inspection, you can be confident that your expectations are being met before your order ships. 

Request
Callback
Yes! I am Interested

Supplier Verification Audit in India

Supplier Verification Audit in India
  • Supplier Verification Audit in India
Get Best Quote
Approx. Price: Rs 10 / DayGet Latest Price
Selecting the right vendors for your business can be one of the most challenging tasks in the world.  But once you find the right supplier your business runs smoothly and grows in leaps and bounds. Thus, it is extremely important for you to carry out a supplier verification audit before finalizing the supplier. 

Supplier Verification audit is a specially designed audit that checks your potential suppliers against certain internationaly recognised standard. The suppliers who pass the supplier audit are vendors who are working according to the highest industry standards. Subsequently, successful supplier audits to ensure that the vendors are able to provide a continuous supply of high-quality materials and services throughout the term of your partnership. 

Supplier verification audit also covers all the legal, operational and functional aspects of a vendor. This, in turn, gives you the peace of mind while doing business with these vendors. 

We are sure you will not want to end up in trouble for hiring a fake vendor or a vendor that was operating illegally?

That is what makes the supplier audits so important. One little mistake and you might end up in huge trouble.  

 

Realizing the importance of supplier audits, Tetra Inspection professionals give you with a clear picture about the status and work-ethics of your intended supplier. Further, here are a few benefits that you will enjoy because of supplier verification audits:

  • Avoidance of illegal/fake suppliers who might bring your business down.
  • A surety of working with the vendors who will provide the best quality products/services.
  • A better idea about the processes and capacity of your supplier to plan your activities accordingly.
  • It will help you ensure a seamless supply chain with minimal stoppages and satisfied customers.
  • You can keep an eye on your suppliers’ performance and adjust your production accordingly.


A team of highly-trained auditors is selected for the supplier audits. These audits are conducted on the vendor’s site and check their facilities for multiple factors including:

  • Background checks of the business and its authenticity.
  • Legal aspects including all the relevant licenses (business license, export license, etc.) and certifications required by the supplier to conduct business.
  • Construction of the facility in terms of capacity for storage, production, transport, and other similar aspects.
  • The Quality Management System in place at the vendors’ site and its effectiveness.
  • Assessment of processes, procedures, skill-levels of employees and other human resource details.
  • The role and effectiveness of the Quality Assurance department in the organization.
Contact CDG for verification of your supplier in India.
Request
Callback
Yes! I am Interested

Initial Production Check in India (IPC)

Initial Production Check in India (IPC)
  • Initial Production Check in India (IPC)
Get Best Quote
Approx. Price: Rs 10 / DayGet Latest Price
Initial production inspection or IPC is the special inspection that is carried out at the very beginning of the batch production. It is usually carried out when 20% of the production has been completed. The IPC checks for the quality, quantity, and specifications of raw materials and the accessories associated with the production. The initial production checks are also classified as an early warning system that attempts to localize and rectify any defects during the very initial phases of production.

CDG will ensure that you start your production on the right footings and avoid any delays/defects during the later parts of production.

Initial production quality control can greatly help you in avoiding bottlenecks, delays, and defects during the production phase that later on result in either fines or dissatisfaction of your customers.

An initial production inspection can greatly help a business in streamlining its supply chain section in multiple ways, for instance, a few of the benefits of IPC are being listed below:

  • Ensuring the raw materials fulfill the regulatory standards to avoid any fines at later stages.
  • Checking the quality of raw materials to eradicate any quality issues in the products.
  • It streamlines your production lines eradicating any delays and stoppages.
  • Improved quality of products and their timely delivery will ensure high customer satisfaction.
  • Nip any issues during their inception and avoid them from becoming any major issues at later stages.
CDG will dispatch its team of experienced inspectors to your production site. These inspectors will be backed by strong checklists that will ensure all aspects of the production line are thoroughly checked.  

During the initial production inspection, our inspectors will check various aspects of the production facility and the raw materials to ensure a smooth and seamless production line. A few of the items checked during the Initial production inspection include:

  • The quality and quantity of raw materials being fed into the production line.
  • Check of the raw materials against regulatory standards.
  • Set-up of the production line, machines, accessories and tools as per regulatory requirements.
Contact CDG for Initial Production Check in India
Request
Callback
Yes! I am Interested

During Production Check in India (DUPRO)

During Production Check in India (DUPRO)
  • During Production Check in India (DUPRO)
Get Best Quote
Approx. Price: Rs 10 / DayGet Latest Price

Delivering on time with high-quality deliverables is extremely important for any businesses’ supply chain. Consequently, it is extremely difficult that one can properly manage the production time of a facility without conducting the DUPRO Inspection. 

During production, checks are specially designed inspections programs that aim to filter out any issues from the production line when 20 % of the products have been produced. It is a method of during production quality control and has wonderful benefits for your business. 
CDG offers physical, on-site inspections of your production line and filters out all the possible issues that can lead to problems later on. During the DUPRO inspection, we do a sampling check as per the AQL or ISO 2859-1 (ANSI/ASQZ1.4) and other important checks that are explained below.
CDG uses specially prepared state of the art checklists for conducting during production checks on site that covers the entire manufacturing process.   

During production quality control forms the backbone of any production line. A slight fault at the beginning of production can potentially damage the entire batch of production. Ultimately, more and more organizations are implementing the DUPRO inspection programs in their production lines to ensure high-quality output and streamlined processes.

In a glance, during production inspections can help you in:
  • Finding issues during the early stages of production when you can make amends.
  • Managing your production schedule more effectively.
  • Avoiding monetary losses due to reworking and returned orders.
  • Improving the quality of your products by “nipping” the problems in the “bud”.
  • Increasing customer satisfaction that will be based on high-quality, on-time deliverables.

 

Without During Production Checks, ensuring high-quality and low turn-around-time is nearly impossible.

Request
Callback
Yes! I am Interested

Container Loading Check in India (CLC)

Container Loading Check in India (CLC)
  • Container Loading Check in India (CLC)
Get Best Quote

Service Details:

Service TypeInspection

In case of choosing Container Loading Inspection also called Container Loading Supervision CDG checks and supervises the loading of your container before shipment. This service is offered at the manufacturer's premises, warehouse or forwarder end. CDG can co-ordinate with the manufacturer to observe that the proper environmental conditions, cleanliness and integrity of the containers are adequate for the transport of the sipmnent to its final destination.This operation is handle when 100% of the goods are ready and packed.We operate a verification of your product: that they match your specifications and your expectations, and the quantities declared on the official documents (Bill of Lading, Purchase Order, Packing List, etc.) match the real situation.

During a Container Loading Check, our inspector will select boxes at random to confirm each carton bears the quantity of product ordered, the quality matches the specifications and/or approved sample provided by you, and that all packaging material contains the correct barcodes, labeling, and packing materials. The entire container loading process is strictly supervised; ensuring all product paid for makes it on the truck. 
For all inspections, CDG uses the standard internationally recognized ANSI/ASQC Z1.4 (ISO 2859-1) statistical sampling procedure. These comprehensive criteria cover: functionality, performance, durability, overall appearance, and dimension. Inspection certificates are issued if stipulated in the letter of credit.

CDG's cargo container loading inspection has been developed for those clients that not only require reassurance during the container loading process, but also need confirmation that safety and quality requirements are met and that correct goods handling procedures are put in place and adhered to.

All of CDG's inspectors are fully trained not only to supervise but to closely monitor the loading process. Before shipping they check the:

 

  • Quality and condition of your goods.
  • Quality and condition of packaging
  • Adherence to correct goods handling procedures
  • Condition of the container your goods are being transported in, including safety and cleanliness
  • Correct loading of your goods and also verify all documentation

Once these checks are completed the container will be sealed with Intertek seals as proof of compliance and an inspection report will be issued to you.

Request
Callback
Yes! I am Interested
X

Service Videos

Explore More Service



Reach Us
RK Kumar (Marketing Manager)
CDG Certification Limited
Statesman House, Barakhamba Road
Connaught Place, New Delhi - 110001, Delhi, India


Call Us


Send E-mailSend SMS